Steam Management

Mechanical steam traps utilize buoyancy to open and close the valve. Also known as 'Float Traps' or 'Bucket Traps'.

Steam traps that utilize the difference in the thermodynamic properties of condensate and steam. Also known as 'Disc Traps'

These traps utilize the difference in the temperatures of steam and condensate. Also known as 'Temperature Control Traps' or 'Balanced Pressure Traps.'

Condensate recovery pumps with motorized condensate transport.

Condensate recovery pump with integral trap requiring no electricity.

Pilot-operated pressure reducing valves with built-in separator and trap. Local-set and remote-set types are available.

Pilot-operated pressure reducing valves to supply steam or air with stable secondary pressure for general use. Local-set and remote-set types are available.

Compact, light-weight, direct-acting pressure reducing valves. Stainless steel construction.

Automatic multi-control valves consisting of pilot-operated pressure reducing valves with built-in separator and trap to supply dry steam. Together with TLV's reliable controller, valves maintain accurate control at the target pressure, temperature, etc.

Automatic multi-control valves consisting of pilot-operated pressure reducing valves. Together with TLV's reliable controller, valves maintain accurate control at the target pressure, temperature, etc.

Self-operated control valves for stabilizing the primary steam pressure of valves. Also known as 'Primary pressure control valves'.

Controllers that are used together with multi-control valves or general control valves.

Cyclone Separators for steam with built-in Free Float® steam trap.

Cyclone Separators for air with built-in air trap.

All steel-welded construction, maintenance-free Cyclone Separators.

Forged steel manifolds with built-in bellows sealed globe valves for steam distribution and condensate recovery on tracing and other applications.

Class 800 forged steel manifolds with piston valves for steam distribution and condensate recovery on tracing and other applications.

Forged trap station equipped with built-in bellows sealed valves for use with condensate manifolds or applications with limited installation space.

High performance forged piston valve traps station rated to 725 PMO for use with condensate manifolds or applications with limited installation space or high PMA requirements.

Traps for the removal of condensate from air lines.

Air traps for high viscosity condensate, with large valve seat and self-cleaning function.

Traps for the removal of condensate from air and non-flammable, non-toxic gas lines.

Steam trap management system comprised of a precision trap survey instrument and management software.

Stethoscope for onsite checking.

Specialized air vents to remove initial air from pipelines carrying liquids.

Air vents to remove air from pipelines carrying liquids.

Air vents to remove air from steam piping and equipment.

Separator filter for use on steam and other gasses (non-toxic, non-flammable). Up to 98% condensate separation efficiency.

Lock release valves to be installed on steam traps J3X and J5X for eliminating the steam-locking problem often associated with cylinder dryers, presses, jacket kettles etc.

Compact forged steel globe valve for steam, hot water, heat transfer fluid, etc.

Valves that ensure reliable, high sealing performance after bypass blow.